KERALA UNIVERSITY Class 3 mechanics of solids Question Paper 2021

Practice authentic previous year questions for better exam preparation.

Sample Questions

(b) A bar of 20 mm diameler is lesled in tension. It is observed that when a load of 40 KN is applied, the exlension measured over a gauge length of 200 mm is 0.12 mm and contraction in diametor is 0.0036 mm . Find poission's ratio and Elastic consla...
A Simply supported beam AB of span 4 meters is subjected to two point loads of 2 kN each at C and D , dislances of 1.5 m and 3 m from the left end. Calculate the shear force and bending moment values at salient points.
(b) A reclangular bar of cross section $30 \mathrm{~mm} \times 60 \mathrm{~mm}$ and length 200 mm is restrained from expansion along its $30 \mathrm{~mm} \times 200 \mathrm{~mm}$ sides by surrounding material. Find the change in dimension and volume ...
(a) Write an expression for the change in volume of a thin cylindrical shell subjected to internal fluid pressure.
A cantilever beam 1.5 meter long, fixed al A is carrying point loads of 1000 kg al B, C and D each and at distances of 0.5 meter, 1.0 meler and 1.5 meler from the fixed end. Calculate the shear force and bending moments at salient points,